Sizing
In the sizing industry Lamberti has been active for many years developing and producing a complete range of "tailor-made" chemicals for each kind of fibre, filament and staple yarns. This range has been studied by paying particular attention to the quality of the woven goods and with respect to the safety of the environment
Staple yarn sizing / denim
Complete range of products, CMC and PVA based, suitable for cotton, wool, viscose staple yarns and their blends with synthetic fibres
Carbocel AM 3 S-G
|
CMC purified grade |
Carbocel I4 - I5
|
CMC-based reinforcing and thickening agents at low - high viscosity with very high solubility into water
|
Lamcol CA 80
|
Complete sizing agent for cotton, wool and their blends especially suitable for high speed loom |
Lamcol CV 90
|
Sizing agent for 100% cotton, viscose staple warps, acrylic fibres, wool and their blends with polyester |
Lamcol G 765
|
Sizing lubricating agent for staple yans for production of denim fabrics and can be used in combination with modified starch |
Lamcol GB
|
One-shot compound for sizing of denim yarns, it provides an excellent and a particular soft hand and is successfully applied on ring and open end spun yarns
|
Lamcol VD 40 NK
|
Modified film characteristics of PVA maintaining the same abrasion resistance but reducing the spliting resistance |
Lamovil F grades
|
Range of PVOH products to be used as reinforcing agent on staple yarn |
Defomex 2033
|
Non silicone defoamer for printing and coating pastes. |
Imbitex NDT
|
Non silicone low foaming with high wetting in both hot or cold conditions, with good detergency and good stability to alkalis |